Add LED lighting for a spectacular nighttime effect

LED strip light can only be added on metal plaques over 25 cm wide

A sign with LED strip addition is intended to be mounted screws. On the back side of the plaque we attach LED strips lined inside a transparent waterproof silicone sleeve.

The LEDs (9.6W) receive electricity through an input cord (the black/red for speakers) running from the switch in the house to the plaque’s mounting spot outside (on a wall or fence).

We supply:

  1. Attached back-side spacers which will keep a gap from the wall (or fence).
  2. Attaching of the LED strips, enclosed in a transparent silicone sleeve.
  3. Screws in the same color as the sign, suitable for the type of wall or fence that you checked in the order form.
  4. Wall plugs (if relevant).
  5. Transformer and fast connector.

Your electrician will take care of:

  1. Move a black/red feed wire from the house to the mounting location of the plaque.
  2. Assemble the wall sign (instructions on our website).
  3. Connect the input wire to the wire on the back-side of the plaque.
  4. Connect the transformer to a black/red feed wire at its starting point in the house.
  5. Connect a circuit breaker (or automatic light sensor) to the transformer.