Illuminated sign for a private home with LED lighting

LED lighting can only be added on metal signs over 20 cm wide

For a lighted sign, we mount LEDs on your plaque’s backside. You’ll find this addition as one of several mounting options when ordering your metal plaque.
On the back of the sign we attach spacers and 12V LED strips which are closed inside a transparent and waterproof silicone sleeve..

In a lighted sign for a private home, the LEDs receive electricity through a supply wire, of the type intended for black / red speakers, which will be connected to the wire coming from your electrical cabinet, where you will fix the transformer that we supply.

For a lighted sign for a private home we provide:

Attach distances from the wall to the back of the sign.
Attach to the back of the W6 LED strip sign, enclosed in a transparent, waterproof and moisture-proof silicone sleeve.
Screws in the same color as the sign and length suitable for the type of wall or fence you have chosen in the order.
Wall dowels.
Transformer and fast connector-transformer-wire.

Your electrician will take care of:

  1. Set a supply wire from your house to the location of the remote control train.
  2. Assemble the sign to the wall (instructions on the website).
  3. Connect the supply wire to the wire coming out of the LED strips in an airtight connection.
  4. Connect the transformer to the supply wire at the starting point in the house.
  5. Connect a circuit breaker (or automatic light sensor) before the transformer.

LED films

LED (Light-Emitting Diode) is a diode that emits light in a narrow spectrum during the passage of electric current. Diodes of this type are the main component in indicator and control lights as well as LEDs, and they are also found in cell phones and TV and computer monitors.
LED film is a flexible and thin film to which light-emitting diodes are attached. The film appears in a long roll and we cut it as needed, solder the wires and put it into a transparent silicone sleeve. The LED film operates on an electrical voltage of 12V and direct current (DC), so in order to connect it to domestic voltage a power supply is required.
There are various suppliers of LED films; The power varies depending on the density of the diodes and depending on the size of the diodes.
LED film is used for a wide variety of uses. For hidden lighting, for ceiling lighting [usually inside an aluminum profile] for lighting under kitchen cabinets, display cabinets, for illuminating different objects, and for different designs.