Order now and get your letters (in Israel) in a week!
|
Size options: |
|||
Size | Height of letter Bet | Numbers’ height | |
M | 10.5 cm (4.1″) | 11.9 cm (4.7″) | |
L | 17 cm (6.7″) | 19.3 cm (7.6″) | |
₪70.00 – ₪124.00
|
Size options: |
|||
Size | Height of letter Bet | Numbers’ height | |
M | 10.5 cm (4.1″) | 11.9 cm (4.7″) | |
L | 17 cm (6.7″) | 19.3 cm (7.6″) | |
2 Sizes: M, L
4 Mounting options:
1) Plain, no holes, for glue mounting
2) Two holes & screws for wooden or metal door / fence
3) Two holes, screws and plugs for wall mounting
4) Double-sided adhesive Scotch 3M glued to the back of the letters
Brass is an alloy composed of the elements copper and zinc. The color of brass is the same as the color of gold but, like silver, if not cleaned from time to time it darkens to a brown color. In the two pictures below you can see an old object made of brass, before and after cleaning:
Brass cleaning: You can find many metal cleaning products on the market, and you can also use a small amount of “00” toilet cleaner (Containing 9% hydrochloric acid) on a soft cloth.
If you are undecided send Ugo a picture of the place for assembly that includes dimensions. Please take a picture from the front – not from the side. We will prepare a computer simulation and then we will know what font size is most suitable for your project. Ugo’s WhatsApp: 050-5800120
For gluing we recommend using “Super 7” or “Super 7 Hi-Tack” silicone glue (stronger).
Gluing on stone:
In addition to silicone glue, marble glue can be used, which is an epoxy glue. In this case it is advisable to search for a professional with experience in this type of work.
Warning: Be careful that the screwdriver does not “escape” and scratch the letter!
In addition, it is recommended to use latex gloves to avoid leaving fingerprints on the metal. In such case remove them with a little vinegar on a soft cloth.
On the back of the letters you can add nuts 1 cm in size and 5 mm thick. If you plan to add spacers, select “Two holes & screws” as mounting option when filling the order form.
In one of the photos in this post you can see what is the recommended location for installing the rear nut on each letter and number.
To glue the nuts on the back of the letters it is recommended to use “Super 7” glue.
The nuts that will be mounted corresponding to the holes do not require gluing because the screw passes through them.
Note: Do not stick a nut too close to the edge of the letter, always leave a space of at least 5 mm.
Cutting metal letters: